Over 10 years we help companies reach their financial and branding goals. Engitech is a values-driven technology agency dedicated.

Gallery

Contacts

411 University St, Seattle, USA

[email protected]

+1 -800-456-478-23

Twitter Facebook-f Pinterest-p Instagram

Warranty

Standard Equipment Warranty

Akela Laser Corporation (“ALC”) warrants that all ALC manufactured equipment will be free of any defect in materials or workmanship for the period of one (1) year, or 10,000 hours whichever comes first. Warranty begins from the date of shipment from the ALC facility. The warranty is extended to customers and applies to all ALC manufactured equipment purchased, installed, and used for the purpose for which such equipment was originally designed. The above warranties cover only defects arising under normal use and do not include malfunctions or failures resulting from misuse, abuse, neglect, alteration, problems with electrical power, usage not in accordance with product instructions, acts of nature, or improper installation or repairs made by anyone other than ALC or a ALC authorized third-party service provider. ALC reserves the right to substitute functionally equivalent new or serviceable used parts.

WARRANTY CLAIMS AND PROCEDURES

  1. During the applicable Standard Equipment Warranty Period outlined above, customer’s sole and exclusive remedy for any breach of the Standard Equipment Warranty will be, at ALC ‘s sole discretion and option, the repair or replacement of the defective product. Components that customer claims to be defective must be available to ALC for inspection and evaluation. To be entitled to rights under the Standard Equipment Warranty, the customer must notify ALC in writing within thirty (30) days after discovering a suspected defect in any product, but in any event prior to the expiration of the applicable Standard Equipment Warranty Period. Notice to a ALC dealer, systems integrator, sales representative or other third party is not notice to ALC. Following its receipt of any such customer notice, ALC will determine whether the reported problem is covered by this Standard Equipment Warranty. If ALC determines that the problem is covered, ALC will authorize repair or replacement of the defective product, as deemed appropriate by ALC in its sole discretion.
  2. Before shipping any product to ALC, the customer must obtain a written return authorization from ALC, and provide any proof of warranty eligibility requested by ALC. Any product received by ALC without a return authorization may, at ALC’s option, be returned to the customer collect. If a warranty replacement part is required, the customer shall provide Purchase Order to ALC prior to shipment of the replacement, to guarantee the return of the rejected unit. Purchase Order is valid until the suspected part is received and the warranty is confirmed by assessment. Once a return authorization is obtained, the customer is responsible for packing and shipping the product/component to which its warranty claim relates to a service facility designated by ALC, within thirty (30) days after receipt of the return authorization. Upon receipt of replacement equipment (or part thereof), the customer has thirty (30) days to tender the defective equipment (or part thereof) to the return carrier for shipment to the service center designated by ALC. If the customer does not timely return the defective equipment (or part thereof), ALC shall invoice the customer for the list price of such equipment (or part thereof), plus applicable shipping. Such failure to return the equipment (or part thereof) may, in ALC’s discretion, be grounds for termination of the warranty and/or suspension of any future advance exchange privileges until such outstanding defective equipment has been returned.
  3. ALC will provide the customer with new, rebuilt, refurbished or alternate equipment (or part thereof) of equal or improved quality, as exchange equipment (or part thereof) to replace eligible defective equipment (or part thereof). Any alternate equipment (or part thereof) will meet or exceed the specifications of the replaced equipment (or part thereof). Rebuilt or refurbished equipment may bear cosmetic blemishes that do not affect performance. Unless otherwise specified by ALC in writing, repaired or replaced equipment (or parts thereof) are covered only for the remainder of the term of the applicable Standard Equipment Warranty. All defective equipment (or parts thereof) replaced by ALC become the property of ALC. ALC has no obligation to (i) service, exchange or otherwise replace any equipment (or part thereof) that has been damaged, modified, abused, misused or over-used as determined by ALC or has been used with non- ALC supplies or products that have caused damage or malfunction; (ii) paint, refinish, refurbish, restore or exchange any equipment (or part thereof) with cosmetic blemishes; (iii) service, exchange or otherwise replace any equipment (or part thereof) if the same would interfere with, impede or be redundant with normal or scheduled maintenance of such equipment (or part thereof); (iv) service, exchange or otherwise replace any equipment (or part thereof) that is within sixty (60) days of the end of its production life; or (v) provide any 3rd party application software support or service involving application hardware or replace any accessories. If ALC elects to perform any such services at customer’s request, then such services will be deemed a service call and all labor, parts, and materials used for the service call will be charged at ALC’s then – prevailing rates.

EQUIPMENT WARRANTY EXCLUSIONS

ALC does not warrant or guarantee, and is not responsible for:

  1. Defects, failures, damages or performance limitations caused in whole or in part by (A) power failures, surges, fires, floods, snow, ice, lightning, excessive heat or cold, highly corrosive environments, accidents, actions of third parties, or other events outside of ALC’s control, or (B) customer’s abuse, mishandling, misuse, negligence, improper storage, servicing or operation, or unauthorized attempts to repair or alter the equipment in any way. Customer must provide qualified technical personnel to maintain and repair the equipment.
  2. Alterations and/or Modifications to any part of ALC’s product, without ALC’s written authorization unconditionally VOIDS the ALC Standard Warranty. Equipment built to customer’s specifications that are later found not to meet customer’s needs or expectations.
  3. The performance of the equipment when used in combination with equipment not purchased, specified, or approved by ALC.

ADDITIONAL WARRANTY NOTES

  1. OEM or third-party equipment that is incorporated into ALC equipment is covered under the applicable ALC Standard Equipment Warranty unless the OEM or Third-Party equipment carries its own limited warranty, in which event the OEM or third-party warranty will apply to such equipment incorporated into ALC equipment. For example and not limitation, PCs, LCDs, PLCs, motors and drives are OEM products that have a limited 1-year manufacturer’s warranty.
  2. Items Sold As Resale. Items sold as resale are such items that are not manufactured by ALC but may be utilized in conjunction with or independently of ALC manufactured equipment (such as computers, printers, and network adapters) and shall be covered only by the specific warranty terms of the supplier or original equipment manufacturer of those items.
  3. The ALC Warranty applies to the original purchaser and is not transferrable. Used Equipment. IF THE EQUIPMENT SPECIFIED IN AN ORDER IS DESCRIBED AS USED, UNLESS OTHERWISE AGREED IN WRITING BY THE PARTIES, IT IS SOLD “AS IS” AND WITH NO WARRANTY.

SERVICES WARRANTY

ALC warrants that the services will be performed in a professional manner (the “Services Warranty”). Notice of a breach of the Services Warranty must (i) specify in reasonable detail, the nature of the claim, and (ii) be received within ninety (90) days from the last day of performance of the services. Upon notice of a breach of the services warranty and ALC’s determination of the validity of such breach of the Services Warranty, ALC will re-perform the applicable services at ALC expense. If after reasonable opportunity ALC is unable to re-perform such services to the reasonable satisfaction of the customer, the customer may, as its exclusive remedy, obtain a refund of the fees paid to ALC under the applicable order for such services.

DISCLAIMER OF WARRANTY

EXCEPT AS EXPRESSLY PROVIDED IN THIS STANDARD WARRANTY POLICY STATEMENT, ALC HEREBY EXPRESSLY DISCLAIMS ALL REPRESENTATIONS, CONDITIONS, AND WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING BY WAY OF EXAMPLE AND NOT LIMITATION, THE IMPLIED WARRANTIES OF TITLE, MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE. LIMITATION ON LIABILITY NOTWITHSTANDING ANYTHING HEREIN TO THE CONTRARY, IN NO EVENT, WILL ALC BE LIABLE FOR ANY SPECIAL, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES WHATSOEVER, INCLUDING LOSS OF PROFITS, WHETHER ARISING IN CONTRACT, TORT, WARRANTY OR OTHERWISE, EVEN IF IT HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE LIMITATIONS SET FORTH HERE WILL APPLY EVEN IF THE REMEDIES OF ERROR CORRECTION, REPAIR OR REPLACEMENT, REPERFORMANCE OF SERVICES AND REFUND OF PAYMENTS COMPLETELY FAIL OF THEIR ESSENTIAL PURPOSE. NOTWITHSTANDING ANYTHING HEREIN TO THE CONTRARY, THE LIMIT OF ALC’ LIABILITY (WHETHER IN CONTRACT, TORT, NEGLIGENCE, STRICT LIABILITY, BY STATUTE OR OTHERWISE) TO CUSTOMER OR TO ANY THIRD PARTY CONCERNING THE ALC EQUIPMENT OR SOFTWARE LICENSES SOLD TO CUSTOMER AND WARRANTED HEREUNDER, ALC’s PERFORMANCE OR NONPERFORMANCE, OR IN ANY MANNER RELATED TO THIS STANDARD WARRANTY POLICY STATEMENT, FOR ANY AND ALL CLAIMS WILL NOT IN THE AGGREGATE EXCEED THE ACTUAL AMOUNTS RECEIVED BY ALC FOR THE SPECIFIC PRODUCT WITH RESPECT TO WHICH SUCH CLAIM IS MADE. GOVERNING LAW AND JURISDICTION